No driver wants to experience brake overheating on a semi-truck. These issues can frequently be completely avoided. The brakes can occasionally overheat and even catch fire, though.-before the problem is identified.
To make sure that your brakes are in good shape, it’s important to get regular inspections. This will lessen the possibility of brake overheating, which is hazardous to both you and other motorists on the road.
What Causes Brake Fires the Most Frequently?
Your semi truck brakes could become overheated and ignite for a variety of reasons. These reasons include:
Poor Braking Method
The proper braking technique isn’t always used by drivers. Do you ever engage in this? In that case, you ought to try to develop the habit of stopping properly! After braking, you must stop immediately and turn the truck off if you see or smell smoke. Get to the bottom of the hill and stop there if you are on a downhill slope.
Dragging Brakes
Driving with dragging brakes can result in problems like overheated brakes. Not only that, but also wheel bearing failure or grease fires that may even spread to the truck’s tires. The semi truck’s rear trailer is where this kind of problem occurs most frequently.
Poorly-Balanced Brakes
Disc brakes may overheat as a result of a brake imbalance. As a result, the grease in the bearings may catch fire. A multiple-trailer semi with unbalanced brakes most frequently happens when some of the trailers are not braking properly, which causes the imbalance.
Wheel Bearing Failure
As was already mentioned, dragging brakes can cause wheel bearing failure. This indicates that the wheel axis is not aligned with the center of the axle. Overheating can start a fire when the vehicle is out of center and the brakes are dragging. Additionally, if one is off-center, another one might soon follow, creating even more problems.
What You Can Do to Lower Your Chances of Overheating
If you want to reduce the likelihood that you’ll have major issues while driving, it’s crucial to get regular maintenance inspections with a mobile tire truck repair or 24-hour truck tire repair service. Additionally, it’s critical that you pull over and conduct your own inspection if you notice anything unusual while driving or that you contact a mobile truck repair service or a 24-hour truck repair service for assistance in ensuring that your truck is secure enough for you to operate.
By checking the brakes, wheels, and tires while keeping an eye out for blown wheel seals and other potential problems, you can perform your own inspection. Additionally, make sure there isn’t an accumulation of grease or oil near the engine, axles, or wheels.
What to Do if a Fire Starts on Your Truck
Use your fire extinguisher to attack the root of the fire if any part of your semi-truck does catch fire. So that you can get assistance, you should dial a truck road service company.
